How To Clean The Jandy Aquapure Flow Sensor

How to Clean a Jandy AquaPure Water Purification Arrangement

The Jandy AquaPure Purification Organisation makes chlorine for your pool out of salt, sanitizing puddle water by killing algae and bacteria. When the salt in the water passes through the chlorine generator prison cell information technology is converted into chlorine.

The Jandy AquaPure Purification System can assistance make clean and sanitize your pool.

After the pool h2o is purified, it changes back into common salt and the process is repeated. The Jandy AquaPure Purification System has an automatic cocky-cleaning component that removes scale, or white crusty deposits, from the cell. If you observe the cell has scaling after checking once every two months, it must be cleaned. Additionally, the menstruation/temp/salinity sensor should be checked for scaling yearly and may demand to exist cleaned.

Remove the jail cell from the Jandy AquaPure Purification System. Spray the cell with a high pressure garden hose. No further cleaning is necessary if this removes the scaling.
Remove the sensor from its port on the cell if scaling is detected. Plug the two adjoining ports. Add one pint of muriatic acrid to two quarts of h2o in a saucepan. Pour the solution into the cell so it begins to foam. Leave the solution in the cell until the foaming has stopped or until the solution has been in the cell for more than xxx minutes.
Wash the jail cell well with water. Repeat the cleaning process if necessary.
Plough the flow/temp/salinity sensor counterclockwise to remove it from the iii-port cell. Clean the sensor contacts gently with a household cleaning pad. Rinse well with water. This should exist done yearly.
Place the prison cell and the flow/temp/salinity sensor back into the Jandy AquaPure Purification System and resume normal performance.

Alert

Article of clothing goggles and prophylactic gloves when handling hydrochloric acid. Add together acrid to h2o, not water to acrid, so it does not splash.

The Drip Cap

The Jandy AquaPure Purification System makes chlorine for your pool out of salt, sanitizing pool water past killing algae and bacteria.
If you discover the cell has scaling after checking once every two months, it must be cleaned.
Spray the jail cell with a high pressure garden hose.
Echo the cleaning process if necessary.
Place the cell and the menses/temp/salinity sensor back into the Jandy AquaPure Purification System and resume normal operation.